Skip to main content

Windows 11 Printer Not Working? 12 Advanced Fixes

Windows 11 computer connected to a printer that is not working.

A printer not working in Windows 11 can cause several problems. Windows may show the printer as offline, fail to detect a connected device, stop printing jobs, or display driver errors. Sometimes, the printer appears correctly in Windows, but documents remain stuck in the print queue.

Some printer problems have simple causes. Others result from incorrect printer ports, damaged driver packages, Print Spooler crashes, USB configuration errors, or network communication failures.

This guide starts with quick solutions for common printer problems. If those steps do not work, continue with the advanced troubleshooting methods to identify and fix the underlying problem.

1. Quick Fixes for Common Printer Problems

Try these basic checks before changing advanced Windows settings.

1.1 Check the Printer Status

Open Settings > Bluetooth & devices > Printers & scanners.

Select your printer and check its status. Look for messages such as Offline, Error, or Driver unavailable.

Also check the printer's display panel for paper jams, empty ink or toner, and other hardware warnings.

1.2 Restart the Printer and Computer

Turn off the printer. Disconnect its power cable for about 30 seconds, reconnect it, and turn it on.

Restart Windows 11 and try printing again.

1.3 Check the USB or Wi-Fi Connection

For a USB printer, connect the cable directly to another USB port on the computer. Avoid using a USB hub during testing.

For a wireless printer, confirm that the printer and computer are connected to the correct network.

If Windows does not recognize a USB device, see our guide on how to fix USB Device Not Recognized errors.

For wireless connection problems, read how to fix Wi-Fi not working in Windows 11.

1.4 Set the Correct Default Printer

Go to Settings > Bluetooth & devices > Printers & scanners.

If Windows manages your default printer automatically, turn off Let Windows manage my default printer. Select your printer and choose Set as default if that option is available.

1.5 Run the Windows Printer Troubleshooter

Open the Get Help app and search for the printer troubleshooter.

Follow the diagnostic instructions. The available automated checks may vary depending on your Windows version and printer.

1.6 Clear Stuck Print Jobs

Open your printer's queue from Settings > Bluetooth & devices > Printers & scanners.

Cancel documents that are stuck in the queue. If Windows cannot remove them, use the Print Spooler troubleshooting method in Section 2.7.

If the printer still does not work, continue with the advanced solutions.

2. Advanced Windows 11 Printer Troubleshooting

The following methods address problems that basic troubleshooting cannot resolve. Identify the symptoms before changing printer settings.

2.1 Fix a Network Printer Showing as Offline by Checking Its TCP/IP Port

A network printer can appear offline even when it is switched on and connected to the router.

One possible cause is an incorrect TCP/IP port configuration. For example, a printer may receive a new IP address from the router, while Windows continues sending print jobs to its previous address.

Step 1: Find the printer's current IP address

You can usually find the IP address through one of these methods:

  • Open the printer's network settings on its control panel.
  • Print a network configuration report.
  • Check the connected-device list in your router.

The exact method depends on the printer manufacturer.

Step 2: Check the port used by Windows

  1. Open Settings.
  2. Select Bluetooth & devices > Printers & scanners.
  3. Select your printer.
  4. Open Printer properties.
  5. Select the Ports tab.
  6. Identify the selected Standard TCP/IP Port.

Compare the port address with the printer's current IP address.

Step 3: Correct the port configuration

If the selected port points to an old IP address, create or configure a Standard TCP/IP Port using the printer's current address.

Use the printer manufacturer's instructions if the device requires a particular port or protocol.

Print a test page after making the change.

Important: Do not change the port simply because the printer is offline. First confirm that the selected port address is incorrect or that the existing port is not communicating with the printer.
Standard TCP/IP printer port settings in Windows.

2.2 Disable SNMP Status Monitoring When It Causes an Offline Error

SNMP (Simple Network Management Protocol) allows Windows to obtain status information from some network printers.

In certain network configurations, Windows may incorrectly report that a printer is offline because SNMP status communication is failing.

You can test this setting if:

  • The printer responds on the network.
  • Its IP address is correct.
  • Windows still reports it as offline.
  • The printer uses a Standard TCP/IP Port with SNMP status monitoring enabled.

Follow these steps:

  1. Open Printer properties.
  2. Select the Ports tab.
  3. Select the Standard TCP/IP Port used by your printer.
  4. Click Configure Port.
  5. Look for SNMP Status Enabled.
  6. If it is enabled, temporarily clear the checkbox.
  7. Click OK and apply the changes.
  8. Try printing a test page.

If printing works, SNMP status communication may have caused the problem.

Important: Disabling SNMP can prevent Windows from receiving certain printer status details. Do not apply this change to every printer. Restore the original setting if it does not solve the problem.

2.3 Replace a WSD Port with a Standard TCP/IP Port

Windows can discover network printers through Web Services for Devices (WSD).

However, some network environments experience printer discovery or communication problems with WSD connections.

Using a Standard TCP/IP Port can be a useful alternative when the printer supports direct IP printing.

Step 1: Find the printer's IP address

Obtain its current IP address from the printer control panel or network configuration report.

Step 2: Add a TCP/IP printer connection

  1. Open Settings.
  2. Select Bluetooth & devices > Printers & scanners.
  3. Select Add device.
  4. Wait for Windows to search.
  5. Select Add manually when the printer is not listed.
  6. Choose Add a printer using an IP address or hostname.
  7. Enter the printer's IP address.
  8. Follow the installation instructions.
  9. Select the correct manufacturer and printer model driver when requested.

Windows may detect an existing printer installation. Avoid creating unnecessary duplicate entries.

Step 3: Test the new connection

Print a test page using the newly installed printer.

If it works, you can remove the old printer entry after confirming that the new installation is stable.

2.4 Fix USB Printing Support and Missing Printer Ports

A USB printer may stop working when Windows fails to create or recognize its printer port.

For example, the printer may appear in Device Manager but not in the printer port list.

Step 1: Check Device Manager

  1. Right-click Start.
  2. Select Device Manager.
  3. Expand Universal Serial Bus controllers.
  4. Look for USB Printing Support.
  5. Check for devices with yellow warning symbols or error messages.

Also expand Printers and Print queues, if those categories are available.

Step 2: Check the printer port

  1. Open Printer properties.
  2. Select the Ports tab.
  3. Look for a USB printer port such as USB001.
  4. Confirm that the correct port is selected.

The exact port name may differ depending on the printer and its installation.

Step 3: Reinstall the USB printer connection

  1. Disconnect the USB cable.
  2. Remove the printer from Settings > Printers & scanners.
  3. Open Device Manager.
  4. Select View > Show hidden devices.
  5. Locate the relevant printer device.
  6. Uninstall the device if it is clearly associated with the faulty printer installation.
  7. Restart Windows.
  8. Install the correct printer software.
  9. Reconnect the USB cable when the manufacturer's installer requests it.
Warning: Do not uninstall unrelated USB controllers simply because a printer is not working. Removing essential USB devices can temporarily affect keyboards, mice, and other connected equipment.
Printer and USB devices displayed in Windows Device Manager.

2.5 Remove Old Printer Drivers Completely

A damaged or incompatible printer driver can prevent Windows from printing correctly.

Simply removing the printer from Settings may not remove its driver package. Windows can sometimes reuse an older package when the printer is installed again.

Step 1: Remove the printer

  1. Open Settings.
  2. Select Bluetooth & devices > Printers & scanners.
  3. Select the affected printer.
  4. Choose Remove.

Step 2: Open Print Server Properties

  1. Press Windows + R.
  2. Type printui /s /t2.
  3. Press Enter.
  4. Open the Drivers tab.
  5. Find the driver associated with your printer.
  6. Select it and choose Remove.

If Windows offers a choice between removing the driver only and removing the driver package, choose the appropriate option after confirming that no other installed printer depends on that package.

Step 3: Install a fresh driver

Download the correct driver from the printer manufacturer's official website.

Check these details before installing:

  • Exact printer model.
  • Windows 11 compatibility.
  • 64-bit or ARM64 system architecture, as applicable.
  • Manufacturer's installation instructions.

Restart the computer and test the printer.

Advanced option: Use PnPUtil

Windows includes a command-line utility called PnPUtil for managing driver packages.

Open Terminal or Command Prompt as administrator and run:

pnputil /enum-drivers

Find the relevant printer driver package. Check its provider, class, version, and published name.

A published name may look like:

oem42.inf

Only after confirming that the package belongs to the printer and is safe to remove, use:

pnputil /delete-driver oem42.inf /uninstall

Replace oem42.inf with the actual published name.

Warning: Do not copy the example name blindly. Removing the wrong driver package can affect other devices. Create a restore point and download the correct replacement driver before proceeding.

2.6 Fix Repeated Print Spooler Crashes

The Print Spooler is a Windows service that manages print jobs and communication with printer drivers.

If this service stops unexpectedly, documents may remain in the queue and printing may fail.

Restarting the service can help with temporary problems. However, repeated crashes require further investigation.

Step 1: Check the Print Spooler service

  1. Press Windows + R.
  2. Type services.msc.
  3. Press Enter.
  4. Find Print Spooler.
  5. Check its status.
  6. If it is stopped, select Start.
  7. If it is running, select Restart.

Step 2: Check Event Viewer

If the service keeps stopping, look for error records.

  1. Press Windows + R.
  2. Type eventvwr.msc.
  3. Press Enter.
  4. Open Windows Logs > System.
  5. Look for errors around the time printing stopped.
  6. Also check Windows Logs > Application.

Look for entries related to:

  • Print Spooler.
  • PrintService.
  • Printer drivers.
  • Faulting applications or modules.

The event details may identify a driver or component associated with the crash.

Step 3: Identify the problematic driver

If the errors repeatedly identify the same printer driver, remove or update that driver using the manufacturer's supported installation package.

Do not delete random files from Windows system folders.

Print Spooler service in Windows Services.

2.7 Clear the Print Spooler Folder Manually

A damaged or stuck print job can prevent other documents from printing.

If normal cancellation does not work, clear the spooler queue manually.

Step 1: Stop Print Spooler

  1. Press Windows + R.
  2. Type services.msc.
  3. Find Print Spooler.
  4. Right-click it and select Stop.

Step 2: Remove temporary print files

Open File Explorer and enter:

C:\Windows\System32\spool\PRINTERS

If Windows requests permission, approve it.

Delete the files inside the PRINTERS folder. Do not delete the folder itself.

Step 3: Restart Print Spooler

Return to Services.

Right-click Print Spooler and select Start.

Try printing a new document.

Warning: This procedure removes pending print jobs from the local queue. Make sure no important documents are waiting to print before clearing it.

2.8 Troubleshoot Printer Driver Isolation and Compatibility

A printer driver that repeatedly crashes can affect the Print Spooler service.

Windows supports printer driver isolation, which allows compatible drivers to run in a separate process rather than directly inside the Spooler process.

This can reduce the effect of a driver failure on other printing operations.

What should you check?

  1. Confirm that the printer driver is compatible with Windows 11.
  2. Check whether the manufacturer provides a newer driver.
  3. Review Event Viewer for repeated driver-related errors.
  4. If Print Management is available, inspect the installed printer drivers.
  5. Check whether the driver supports isolation.

On supported Windows editions, you may be able to open Print Management by running:

printmanagement.msc

Look under Print Servers > your computer > Drivers.

Driver isolation options depend on the installed driver and Windows configuration. Do not force isolation on a driver that does not support it.

If the driver continues to crash, replacing it with a supported manufacturer driver is usually a better solution.

2.9 Diagnose Network Printer Problems Using IP Address and Ping

A network printer may appear in Windows but fail to receive print jobs.

The problem may involve the printer's IP address, network connection, router configuration, or communication between the computer and printer.

Step 1: Check the computer's IP address

Open Command Prompt and run:

ipconfig

Find the active network adapter.

Check its IPv4 Address and Default Gateway.

Step 2: Check the printer's IP address

Find the printer's current IP address through its control panel or network report.

Confirm that the printer and computer are connected to the intended network.

Step 3: Test network communication

Run:

ping 192.168.1.100

Replace the example address with your printer's actual IP address.

If you receive replies, the printer is responding to ICMP requests.

If you receive Request timed out, check the printer's network connection, IP address, and network configuration.

Important: Some printers or networks block Ping requests. A failed Ping test does not always mean the printer is disconnected.

If necessary, check the printer manufacturer's recommended network ports and protocols. Do not open firewall ports without confirming that the printer requires them.

2.10 Resolve Shared Printer and RPC Connection Errors

A printer shared through another Windows computer may stop working even when the printer itself is functioning correctly.

Windows 11 uses RPC (Remote Procedure Call) for print-related communication between computers.

Changes to network settings, authentication, security policies, or RPC configuration can affect shared printer connections.

Step 1: Check the host computer

The host computer is the device physically connected to the printer or sharing it over the network.

  1. Open Settings > Bluetooth & devices > Printers & scanners.
  2. Select the printer.
  3. Open Printer properties.
  4. Select the Sharing tab.
  5. Confirm that Share this printer is enabled.
  6. Check the share name.

Step 2: Check network sharing

On both computers:

  1. Open Settings.
  2. Select Network & internet.
  3. Open Advanced network settings.
  4. Select Advanced sharing settings.
  5. Under Private networks, check Network discovery and File and printer sharing.

Only enable sharing on trusted networks.

For more information, see our guide on preparing a Windows computer for file and printer sharing.

Step 3: Test access to the host computer

Open File Explorer on the client computer.

Enter:

\\ComputerName

Replace ComputerName with the actual host computer name.

If Windows cannot access the host computer, investigate network connectivity and name resolution before changing printer drivers.

Step 4: Reconnect the shared printer

If the host is accessible:

  1. Open Printers & scanners.
  2. Select Add device.
  3. Choose Add manually if necessary.
  4. Select the option to add a shared printer by name.
  5. Enter \\ComputerName\PrinterShareName.
  6. Follow the installation instructions.

Replace both names with the actual computer and printer share names.

RPC warning: Windows 11 uses specific RPC communication defaults for printing. Do not apply random registry changes or weaken RPC security settings to solve a shared printer problem. Check the actual error and follow Microsoft's documented configuration guidance.

2.11 Fix Printer Problems After a Windows Update

A printer that worked before a Windows update may stop working afterward.

Possible causes include driver incompatibility, changed device configuration, or a problem introduced by an update.

Try these steps:

  1. Open Device Manager.
  2. Expand Printers or Print queues.
  3. Right-click the affected printer.
  4. Select Properties.
  5. Open the Driver tab.
  6. Check whether Roll Back Driver is available.

If the option is available and the problem started immediately after a driver update, you can try rolling back the driver.

If the problem started after a Windows quality update, check Windows Update history and the manufacturer's support information for known issues.

Do not uninstall a Windows update without evidence that it caused the problem. First check whether a corrected printer driver is available.

For additional help, see how to fix Windows 11 update problems.

2.12 Check Printer Driver Compatibility and Architecture

Some printers have limited support in Windows 11.

This is particularly important when installing older printers or using a computer with an ARM-based processor.

Before installing a driver, check:

  • Exact printer model and revision.
  • Supported Windows versions.
  • 64-bit or ARM64 compatibility.
  • Availability of a manufacturer driver.
  • Whether Windows provides a compatible built-in driver.

For some printers, Windows may use a class driver or IPP-based printing support. Such drivers may provide basic printing but not every manufacturer-specific feature.

If you need scanning, advanced paper handling, ink monitoring, or other special functions, check the manufacturer's software requirements.

3. Advanced Diagnostic Commands

The following commands can help identify the cause of printer problems. Run administrative commands only when required.

Command Purpose
ipconfig Displays network configuration.
ping Tests network response.
services.msc Opens Windows Services.
eventvwr.msc Opens Event Viewer.
printui /s /t2 Opens Print Server Properties.
printmanagement.msc Opens Print Management, when available.
pnputil /enum-drivers Lists third-party driver packages.

3.1 Use PowerShell to Inspect Installed Printers

Open Windows Terminal or PowerShell.

Run:

Get-Printer

This displays installed printers and their status.

To inspect printer ports, run:

Get-PrinterPort

These commands can help identify incorrect printer entries or port configurations.

3.2 Check the Print Spooler Service

Open PowerShell as administrator and run:

Get-Service Spooler

Check whether the service is Running or Stopped.

To restart it, use:

Restart-Service Spooler

Save pending print jobs or confirm that the queue can be cleared before restarting the service.

For more useful Windows Run commands, see our Windows Run box commands guide.

4. Find the Right Fix for Your Printer Problem

Use this table to select the most relevant troubleshooting method.

Printer Problem Recommended Troubleshooting
Printer shows Offline Check TCP/IP Port and SNMP status.
Network printer not detected Check IP address and WSD/TCP-IP configuration.
USB printer not detected Check USB Printing Support and printer port.
Print jobs remain stuck Clear the queue and inspect Print Spooler.
Print Spooler keeps stopping Check Event Viewer and printer drivers.
Printer stops after driver installation Check driver compatibility and isolation.
Shared printer cannot connect Check sharing, network access, and RPC.
Printer stops after Windows Update Check driver updates and rollback options.
Printer works, but advanced features are missing Install the correct manufacturer software.

5. Frequently Asked Questions

Why does Windows 11 show my printer as offline even when it is connected?

Windows may be unable to communicate with the printer through its configured port. Check the printer's IP address, TCP/IP port settings, and SNMP status if it uses a Standard TCP/IP Port.

How do I fix a printer that is not detected by Windows 11?

Check the USB connection or network configuration first. Then inspect Device Manager, verify the printer port, and install a compatible driver from the manufacturer.

Why does the Print Spooler keep stopping?

A damaged print job, incompatible printer driver, or faulty printing component may cause the service to stop. Use Event Viewer to identify related errors and investigate the responsible driver.

How do I completely remove a printer driver?

Remove the printer, open Print Server Properties using printui /s /t2, and inspect the Drivers tab. For advanced driver package removal, use PnPUtil only after identifying the correct package.

Should I disable SNMP for my printer?

Only if you have evidence that SNMP status monitoring is causing an incorrect offline status. Disabling it can reduce the status information Windows receives from the printer.

What is the difference between a WSD port and a TCP/IP port?

A WSD port uses Web Services for Devices to discover and communicate with supported network devices. A Standard TCP/IP Port uses the printer's network address and supported printing protocol.

Can a Windows update cause printer problems?

Yes. A Windows update or driver update can affect printer compatibility or communication. Check the printer manufacturer's support page and Windows Update history before changing system settings.

Why can I print from one computer but not another?

The problem may be related to the second computer's driver, network permissions, shared printer configuration, or RPC communication. Check whether the host computer is accessible before reinstalling the printer.

Conclusion

A printer not working in Windows 11 does not always mean that the printer itself is faulty. Incorrect TCP/IP ports, USB configuration problems, damaged driver packages, Print Spooler crashes, and network communication errors can all prevent successful printing.

Start with the quick fixes, then use the advanced methods that match your printer's symptoms. Avoid changing unrelated Windows settings or removing drivers without identifying the cause.

If the problem continues, check the printer manufacturer's support documentation for model-specific instructions.

Related Articles

Computerdok provides practical computer troubleshooting guides to help you solve Windows, hardware, software, and maintenance problems.

Popular posts from this blog

How to Fix Flickering Screen on Windows 10 and 11 (2026 Guide)

Flickering Screen on Windows 10 and 11? Here’s How to Fix It for Good Is your screen flashing, flickering, or blinking on and off while you work? You are not alone. Screen flickering is one of the most common — and most annoying — problems that Windows 10 and Windows 11 users run into. The good news is that most of the time, this is not a broken monitor. It’s a small software or driver issue that you can fix yourself in a few minutes. In this guide, we’ll walk through every proven fix for screen flickering in Windows 10 and Windows 11, from the quickest 30-second checks to deeper driver and hardware fixes. We’ll also show you a simple test that tells you in seconds whether your flickering is caused by hardware or software — so you don’t waste time on the wrong fix. Table of Contents What Causes Screen Flickering in Windows 10 and 11 Step 1: Run the Task Manager Flicker Test Fix 1: Check Your Monitor and Cables Fix 2: Set the Correct Refresh Rate Fix 3: Turn Off HDR Fix 4: Upd...

Window Manager High GPU Usage: How to Fix

Fix Desktop Window Manager High GPU Usage (dwm.exe)—Complete Guide If your Desktop Window Manager (dwm.exe) is constantly using a high percentage of your GPU, you're not alone. This guide explains exactly what Desktop Window Manager is, why it can spike GPU usage, and step‑by‑step fixes that work on Windows 10 and Windows 11. What Is Desktop Window Manager (dwm.exe)? Desktop Window Manager ( DWM , process name dwm.exe ) is Windows' compositing window manager. Instead of each application drawing directly to the screen, apps render their windows into memory, and DWM combines ("composites") them into the final image  Because DWM controls how windows are layered, it enables: Transparent window effects and acrylic/blur in Windows 11 Live taskbar thumbnails and window animations Smooth window resizing, snapping, and virtual desktops High‑DPI and multi‑monitor rendering support DWM relies heavily on the GPU to render these effects efficiently. That's why you'll often...

How to Fix Laptop Overheating and Fan Noise (Windows)

How to Stop Laptop Overheating and Fan Noise (Windows, Dell, Lenovo, HP) If your laptop is hot and the fan sounds like a jet engine, something is making your cooling system work overtime. The good news is that most overheating and noise problems have a few common causes: dust, blocked vents, background processes, old thermal paste, and old software. And most of them can be fixed without a trip to the repair shop. This guide will show you why laptops get hot and noisy, how to tell if it’s something serious, and how to fix it with step-by-step instructions for Windows 11, Dell, Lenovo, and HP laptops. Why Is My Laptop So Noisy and Hot? When the laptop gets too hot inside, the fan ramps up to a higher, louder gear, as the cooling system tries to prevent the CPU and GPU from throttling or shutting down. Here are some common reasons for a hot and noisy laptop: . Blocked or dusty vents — dust buildup restricts airflow, so the fan has to spin harder to move the same amount of air. Soft sur...